<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.4.2">
<drawing>
<settings>
<setting alwaysvectorfont="no"/>
<setting verticaltext="up"/>
</settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
<layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
<layer number="4" name="Route4" color="1" fill="4" visible="no" active="no"/>
<layer number="5" name="Route5" color="4" fill="4" visible="no" active="no"/>
<layer number="6" name="Route6" color="1" fill="8" visible="no" active="no"/>
<layer number="7" name="Route7" color="4" fill="8" visible="no" active="no"/>
<layer number="8" name="Route8" color="1" fill="2" visible="no" active="no"/>
<layer number="9" name="Route9" color="4" fill="2" visible="no" active="no"/>
<layer number="10" name="Route10" color="1" fill="7" visible="no" active="no"/>
<layer number="11" name="Route11" color="4" fill="7" visible="no" active="no"/>
<layer number="12" name="Route12" color="1" fill="5" visible="no" active="no"/>
<layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
<layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
<layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="no"/>
<layer number="17" name="Pads" color="2" fill="1" visible="no" active="no"/>
<layer number="18" name="Vias" color="2" fill="1" visible="no" active="no"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="no"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="no"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="no"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="no"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="no"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="no"/>
<layer number="25" name="tNames" color="7" fill="1" visible="no" active="no"/>
<layer number="26" name="bNames" color="7" fill="1" visible="no" active="no"/>
<layer number="27" name="tValues" color="7" fill="1" visible="no" active="no"/>
<layer number="28" name="bValues" color="7" fill="1" visible="no" active="no"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="no"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="no"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="no"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="no"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="no"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="no"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="no"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="no"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="no"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="no"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="no"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="no"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="no"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="no"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="no"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="no"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="no"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="no"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="no"/>
<layer number="48" name="Document" color="7" fill="1" visible="no" active="no"/>
<layer number="49" name="Reference" color="7" fill="1" visible="no" active="no"/>
<layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="no"/>
<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="no"/>
<layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
<layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
<layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
<layer number="57" name="tCAD" color="7" fill="1" visible="no" active="no"/>
<layer number="59" name="tCarbon" color="7" fill="1" visible="no" active="no"/>
<layer number="60" name="bCarbon" color="7" fill="1" visible="no" active="no"/>
<layer number="88" name="SimResults" color="9" fill="1" visible="yes" active="yes"/>
<layer number="89" name="SimProbes" color="9" fill="1" visible="yes" active="yes"/>
<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
<layer number="99" name="SpiceOrder" color="7" fill="1" visible="yes" active="yes"/>
<layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
<layer number="101" name="Patch_Top" color="12" fill="4" visible="yes" active="yes"/>
<layer number="102" name="Vscore" color="7" fill="1" visible="yes" active="yes"/>
<layer number="103" name="tMap" color="7" fill="1" visible="yes" active="yes"/>
<layer number="104" name="Name" color="16" fill="1" visible="yes" active="yes"/>
<layer number="105" name="tPlate" color="7" fill="1" visible="yes" active="yes"/>
<layer number="106" name="bPlate" color="7" fill="1" visible="yes" active="yes"/>
<layer number="107" name="Crop" color="7" fill="1" visible="yes" active="yes"/>
<layer number="108" name="tplace-old" color="10" fill="1" visible="yes" active="yes"/>
<layer number="109" name="ref-old" color="11" fill="1" visible="yes" active="yes"/>
<layer number="110" name="fp0" color="7" fill="1" visible="no" active="yes"/>
<layer number="111" name="LPC17xx" color="7" fill="1" visible="no" active="yes"/>
<layer number="112" name="tSilk" color="7" fill="1" visible="no" active="yes"/>
<layer number="113" name="IDFDebug" color="4" fill="1" visible="no" active="yes"/>
<layer number="114" name="Badge_Outline" color="11" fill="1" visible="no" active="no"/>
<layer number="115" name="ReferenceISLANDS" color="7" fill="1" visible="yes" active="yes"/>
<layer number="116" name="Patch_BOT" color="9" fill="4" visible="yes" active="yes"/>
<layer number="117" name="BACKMAAT1" color="7" fill="1" visible="yes" active="yes"/>
<layer number="118" name="Rect_Pads" color="7" fill="1" visible="yes" active="yes"/>
<layer number="119" name="KAP_TEKEN" color="7" fill="1" visible="yes" active="yes"/>
<layer number="120" name="KAP_MAAT1" color="7" fill="1" visible="yes" active="yes"/>
<layer number="121" name="_tsilk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="122" name="_bsilk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="123" name="tTestmark" color="7" fill="1" visible="no" active="yes"/>
<layer number="124" name="bTestmark" color="7" fill="1" visible="no" active="yes"/>
<layer number="125" name="_tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="126" name="_bNames" color="7" fill="1" visible="no" active="yes"/>
<layer number="127" name="_tValues" color="7" fill="1" visible="no" active="yes"/>
<layer number="128" name="_bValues" color="7" fill="1" visible="no" active="yes"/>
<layer number="129" name="Mask" color="7" fill="1" visible="yes" active="yes"/>
<layer number="130" name="SMDSTROOK" color="7" fill="1" visible="yes" active="yes"/>
<layer number="131" name="tAdjust" color="7" fill="1" visible="no" active="yes"/>
<layer number="132" name="bAdjust" color="7" fill="1" visible="no" active="yes"/>
<layer number="133" name="bottom_silk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="144" name="Drill_legend" color="7" fill="1" visible="yes" active="yes"/>
<layer number="150" name="Notes" color="7" fill="1" visible="no" active="yes"/>
<layer number="151" name="HeatSink" color="7" fill="1" visible="yes" active="yes"/>
<layer number="152" name="_bDocu" color="7" fill="1" visible="no" active="yes"/>
<layer number="153" name="FabDoc1" color="7" fill="1" visible="no" active="yes"/>
<layer number="154" name="FabDoc2" color="7" fill="1" visible="no" active="yes"/>
<layer number="155" name="FabDoc3" color="7" fill="1" visible="no" active="yes"/>
<layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
<layer number="200" name="200bmp" color="1" fill="10" visible="yes" active="yes"/>
<layer number="201" name="201bmp" color="2" fill="10" visible="yes" active="yes"/>
<layer number="202" name="202bmp" color="3" fill="10" visible="yes" active="yes"/>
<layer number="203" name="203bmp" color="4" fill="10" visible="yes" active="yes"/>
<layer number="204" name="204bmp" color="5" fill="10" visible="yes" active="yes"/>
<layer number="205" name="205bmp" color="6" fill="10" visible="yes" active="yes"/>
<layer number="206" name="206bmp" color="7" fill="10" visible="yes" active="yes"/>
<layer number="207" name="207bmp" color="8" fill="10" visible="yes" active="yes"/>
<layer number="208" name="208bmp" color="9" fill="10" visible="yes" active="yes"/>
<layer number="209" name="209bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="210" name="210bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="211" name="211bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="212" name="212bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="213" name="213bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="214" name="214bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="215" name="215bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="216" name="216bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
<layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
<layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
<layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
<layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
<layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
<layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
<layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
<layer number="225" name="225bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="226" name="226bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="227" name="227bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="228" name="228bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="229" name="229bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="230" name="230bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="231" name="231bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="232" name="Eagle3D_PG2" color="7" fill="1" visible="no" active="no"/>
<layer number="233" name="Eagle3D_PG3" color="7" fill="1" visible="no" active="no"/>
<layer number="248" name="Housing" color="7" fill="1" visible="no" active="yes"/>
<layer number="249" name="Edge" color="7" fill="1" visible="no" active="yes"/>
<layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
<layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
<layer number="254" name="cooling" color="7" fill="1" visible="yes" active="yes"/>
<layer number="255" name="routoute" color="7" fill="1" visible="yes" active="yes"/>
</layers>
<schematic xreflabel="%F%N/%S.%C%R" xrefpart="/%S.%C%R">
<libraries>
<library name="10-84-4060">
<description>&lt;Pin &amp; Socket Connectors HEADER VERT MALE 6P&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by SamacSys&lt;/author&gt;</description>
<packages>
<package name="SHDR6W166P635_2X3_2032X1397X13">
<description>&lt;b&gt;10-84-4060&lt;/b&gt;&lt;br&gt;
</description>
<pad name="1" x="0" y="0" drill="1.85" diameter="3.81" shape="offset" rot="R180"/>
<pad name="2" x="6.35" y="0" drill="1.85" diameter="3.81" shape="square"/>
<pad name="3" x="12.7" y="0" drill="1.85" diameter="3.81" shape="offset"/>
<pad name="4" x="0" y="6.35" drill="1.85" diameter="3.81" shape="offset" rot="R180"/>
<pad name="5" x="6.35" y="6.35" drill="1.85" diameter="3.81" shape="square"/>
<pad name="6" x="12.7" y="6.35" drill="1.85" diameter="3.81" shape="offset"/>
<text x="-8.89" y="2.54" size="1.27" layer="25" align="center">&gt;NAME</text>
<text x="-8.89" y="5.08" size="1.27" layer="21" align="center">&gt;VALUE</text>
<wire x1="-4.185" y1="-4.185" x2="-4.185" y2="10.535" width="0.05" layer="51"/>
<wire x1="-4.185" y1="10.535" x2="16.885" y2="10.535" width="0.05" layer="51"/>
<wire x1="16.885" y1="10.535" x2="16.885" y2="-4.185" width="0.05" layer="51"/>
<wire x1="16.885" y1="-4.185" x2="-4.185" y2="-4.185" width="0.05" layer="51"/>
<wire x1="-3.935" y1="-3.935" x2="-3.935" y2="10.285" width="0.1" layer="51"/>
<wire x1="-3.935" y1="10.285" x2="16.635" y2="10.285" width="0.1" layer="51"/>
<wire x1="16.635" y1="10.285" x2="16.635" y2="-3.935" width="0.1" layer="51"/>
<wire x1="16.635" y1="-3.935" x2="-3.935" y2="-3.935" width="0.1" layer="51"/>
<wire x1="0" y1="-3.935" x2="16.635" y2="-3.935" width="0.2" layer="21"/>
<wire x1="16.635" y1="-3.935" x2="16.635" y2="10.285" width="0.2" layer="21"/>
<wire x1="16.635" y1="10.285" x2="-3.935" y2="10.285" width="0.2" layer="21"/>
<wire x1="-3.935" y1="10.285" x2="-3.935" y2="0" width="0.2" layer="21"/>
</package>
</packages>
<symbols>
<symbol name="10-84-4060">
<wire x1="5.08" y1="2.54" x2="15.24" y2="2.54" width="0.254" layer="94"/>
<wire x1="15.24" y1="-7.62" x2="15.24" y2="2.54" width="0.254" layer="94"/>
<wire x1="15.24" y1="-7.62" x2="5.08" y2="-7.62" width="0.254" layer="94"/>
<wire x1="5.08" y1="2.54" x2="5.08" y2="-7.62" width="0.254" layer="94"/>
<text x="16.51" y="7.62" size="1.778" layer="95" align="center-left">&gt;NAME</text>
<text x="16.51" y="5.08" size="1.778" layer="96" align="center-left">&gt;VALUE</text>
<pin name="1" x="0" y="0" length="middle"/>
<pin name="3" x="0" y="-2.54" length="middle"/>
<pin name="5" x="0" y="-5.08" length="middle"/>
<pin name="2" x="20.32" y="0" length="middle" rot="R180"/>
<pin name="4" x="20.32" y="-2.54" length="middle" rot="R180"/>
<pin name="6" x="20.32" y="-5.08" length="middle" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="10-84-4060" prefix="J">
<description>&lt;b&gt;Pin &amp; Socket Connectors HEADER VERT MALE 6P&lt;/b&gt;&lt;p&gt;
Source: &lt;a href="https://www.molex.com/pdm_docs/sd/010844060_sd.pdf"&gt; Datasheet &lt;/a&gt;</description>
<gates>
<gate name="G$1" symbol="10-84-4060" x="0" y="0"/>
</gates>
<devices>
<device name="" package="SHDR6W166P635_2X3_2032X1397X13">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
<connect gate="G$1" pin="5" pad="5"/>
<connect gate="G$1" pin="6" pad="6"/>
</connects>
<technologies>
<technology name="">
<attribute name="ALLIED_NUMBER" value="70246866" constant="no"/>
<attribute name="ALLIED_PRICE-STOCK" value="https://www.alliedelec.com/molex-incorporated-10-84-4060/70246866/" constant="no"/>
<attribute name="DESCRIPTION" value="Pin &amp; Socket Connectors HEADER VERT MALE 6P" constant="no"/>
<attribute name="HEIGHT" value="13.97mm" constant="no"/>
<attribute name="MANUFACTURER_NAME" value="Molex" constant="no"/>
<attribute name="MANUFACTURER_PART_NUMBER" value="10-84-4060" constant="no"/>
<attribute name="MOUSER_PART_NUMBER" value="538-10-84-4060" constant="no"/>
<attribute name="MOUSER_PRICE-STOCK" value="https://www.mouser.com/Search/Refine.aspx?Keyword=538-10-84-4060" constant="no"/>
<attribute name="RS_PART_NUMBER" value="" constant="no"/>
<attribute name="RS_PRICE-STOCK" value="" constant="no"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="powerBoardReplicaRequiredComponents">
<packages>
<package name="XT60_FEMALE">
<description>Footprint : &lt;B&gt;Vertical Mount Through-Hole Female (receptacle) XT60 Connector&lt;/B&gt;</description>
<pad name="-" x="-3.5306" y="0" drill="4.35" shape="offset" rot="R180"/>
<pad name="+" x="3.5306" y="0" drill="4.35" shape="offset"/>
<wire x1="-5.0525" y1="4.64" x2="7.8675" y2="4.64" width="0.127" layer="21"/>
<wire x1="-5.0525" y1="-4.64" x2="7.8675" y2="-4.64" width="0.127" layer="21"/>
<wire x1="7.8675" y1="4.64" x2="7.8675" y2="-4.64" width="0.127" layer="21"/>
<wire x1="-7.8675" y1="-1.43" x2="-7.8675" y2="1.43" width="0.127" layer="21"/>
<wire x1="-7.8675" y1="-1.43" x2="-5.0525" y2="-4.64" width="0.127" layer="21"/>
<wire x1="-7.8675" y1="1.43" x2="-5.0525" y2="4.64" width="0.127" layer="21"/>
<text x="8.8" y="-4.64" size="1.27" layer="25" rot="R90" align="center-left">&gt;NAME</text>
<text x="7.8675" y="4.94" size="1.27" layer="27" align="bottom-right">&gt;VALUE</text>
<text x="-3.4" y="-6.6" size="2.54" layer="21" align="center">-</text>
<text x="3.8" y="-6.6" size="2.54" layer="21" align="center">+</text>
</package>
<package name="CPOL-RADIAL-5MM-10MM" urn="urn:adsk.eagle:footprint:37387/1">
<description>5 mm spaced PTHs in 10 mm diameter silk ring</description>
<wire x1="-1.905" y1="2.54" x2="-3.175" y2="2.54" width="0.2032" layer="21"/>
<wire x1="3.175" y1="2.54" x2="1.905" y2="2.54" width="0.2032" layer="21"/>
<wire x1="2.54" y1="3.175" x2="2.54" y2="1.905" width="0.2032" layer="21"/>
<circle x="0" y="0" radius="5" width="0.2032" layer="21"/>
<pad name="-" x="-2.5" y="0" drill="0.9" diameter="1.9304"/>
<pad name="+" x="2.5" y="0" drill="0.9" diameter="1.9304" shape="square"/>
<text x="0" y="-5.207" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;Value</text>
<text x="0" y="5.207" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;Name</text>
</package>
<package name="CPOL-RADIAL-5MM-10MM-KIT" urn="urn:adsk.eagle:footprint:37388/1" locally_modified="yes">
<description>5 mm spaced PTHs, with 10 mm silk ring and no exposed copper on top</description>
<wire x1="-1.905" y1="2.54" x2="-3.175" y2="2.54" width="0.2032" layer="21"/>
<wire x1="3.008" y1="2.54" x2="1.992" y2="2.54" width="0.2032" layer="21"/>
<wire x1="2.5" y1="3.048" x2="2.5" y2="2.032" width="0.2032" layer="21"/>
<circle x="0" y="0" radius="5" width="0.2032" layer="21"/>
<circle x="-2.5" y="0" radius="0.447040625" width="0" layer="29"/>
<circle x="2.5" y="0" radius="0.45" width="0" layer="29"/>
<circle x="-2.5" y="0" radius="0.9779" width="0" layer="30"/>
<pad name="-" x="-2.5" y="0" drill="0.9" diameter="2.54" stop="no"/>
<pad name="+" x="2.5" y="0" drill="0.9" diameter="2.54" shape="square" stop="no"/>
<text x="0" y="-5.207" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;Value</text>
<text x="0" y="5.207" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;Name</text>
<rectangle x1="1.5" y1="-1" x2="3.5" y2="1" layer="30"/>
</package>
<package name="0402" urn="urn:adsk.eagle:footprint:37389/1">
<description>&lt;p&gt;&lt;b&gt;Generic 1005 (0402) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<wire x1="-0.2704" y1="0.2286" x2="0.2704" y2="0.2286" width="0.1524" layer="51"/>
<wire x1="0.2704" y1="-0.2286" x2="-0.2704" y2="-0.2286" width="0.1524" layer="51"/>
<wire x1="-1.2" y1="0.65" x2="1.2" y2="0.65" width="0.0508" layer="39"/>
<wire x1="1.2" y1="0.65" x2="1.2" y2="-0.65" width="0.0508" layer="39"/>
<wire x1="1.2" y1="-0.65" x2="-1.2" y2="-0.65" width="0.0508" layer="39"/>
<wire x1="-1.2" y1="-0.65" x2="-1.2" y2="0.65" width="0.0508" layer="39"/>
<smd name="1" x="-0.58" y="0" dx="0.85" dy="0.9" layer="1"/>
<smd name="2" x="0.58" y="0" dx="0.85" dy="0.9" layer="1"/>
<text x="0" y="0.762" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-0.762" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.3048" layer="51"/>
<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.3048" layer="51"/>
<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
</package>
<package name="0603" urn="urn:adsk.eagle:footprint:37386/1">
<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<wire x1="-1.6" y1="0.7" x2="1.6" y2="0.7" width="0.0508" layer="39"/>
<wire x1="1.6" y1="0.7" x2="1.6" y2="-0.7" width="0.0508" layer="39"/>
<wire x1="1.6" y1="-0.7" x2="-1.6" y2="-0.7" width="0.0508" layer="39"/>
<wire x1="-1.6" y1="-0.7" x2="-1.6" y2="0.7" width="0.0508" layer="39"/>
<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
<text x="0" y="0.762" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-0.762" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
</package>
<package name="CAP-PTH-SMALL-KIT" urn="urn:adsk.eagle:footprint:37404/1">
<description>&lt;h3&gt;CAP-PTH-SMALL-KIT&lt;/h3&gt;
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
<wire x1="0" y1="0.635" x2="0" y2="-0.635" width="0.254" layer="21"/>
<wire x1="-2.667" y1="1.27" x2="2.667" y2="1.27" width="0.254" layer="21"/>
<wire x1="2.667" y1="1.27" x2="2.667" y2="-1.27" width="0.254" layer="21"/>
<wire x1="2.667" y1="-1.27" x2="-2.667" y2="-1.27" width="0.254" layer="21"/>
<wire x1="-2.667" y1="-1.27" x2="-2.667" y2="1.27" width="0.254" layer="21"/>
<pad name="1" x="-1.397" y="0" drill="1.016" diameter="2.032" stop="no"/>
<pad name="2" x="1.397" y="0" drill="1.016" diameter="2.032" stop="no"/>
<polygon width="0.127" layer="30">
<vertex x="-1.4021" y="-0.9475" curve="-90"/>
<vertex x="-2.357" y="-0.0178" curve="-90.011749"/>
<vertex x="-1.4046" y="0.9576" curve="-90"/>
<vertex x="-0.4546" y="-0.0204" curve="-90.024193"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="-1.4046" y="-0.4395" curve="-90.012891"/>
<vertex x="-1.8491" y="-0.0153" curve="-90"/>
<vertex x="-1.4046" y="0.452" curve="-90"/>
<vertex x="-0.9627" y="-0.0051" curve="-90.012967"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="1.397" y="-0.9475" curve="-90"/>
<vertex x="0.4421" y="-0.0178" curve="-90.011749"/>
<vertex x="1.3945" y="0.9576" curve="-90"/>
<vertex x="2.3445" y="-0.0204" curve="-90.024193"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="1.3945" y="-0.4395" curve="-90.012891"/>
<vertex x="0.95" y="-0.0153" curve="-90"/>
<vertex x="1.3945" y="0.452" curve="-90"/>
<vertex x="1.8364" y="-0.0051" curve="-90.012967"/>
</polygon>
</package>
<package name="DC-DC-STEP-DOWN-LM2596">
<description>Footprint : &lt;b&gt;DC/DC Step-Down Regulator&lt;/b&gt; based on &lt;b&gt;LM2596-ADJ  Chip&lt;/b&gt;</description>
<wire x1="-21.59" y1="10.414" x2="21.59" y2="10.414" width="0.127" layer="21"/>
<wire x1="21.59" y1="10.414" x2="21.59" y2="-10.414" width="0.127" layer="21"/>
<wire x1="21.59" y1="-10.414" x2="-21.59" y2="-10.414" width="0.127" layer="21"/>
<wire x1="-21.59" y1="-10.414" x2="-21.59" y2="10.414" width="0.127" layer="21"/>
<pad name="IN+" x="-19.812" y="8.636" drill="1.5" diameter="2.5" shape="square"/>
<pad name="IN-" x="-19.812" y="-8.636" drill="1.5" diameter="2.5" shape="square"/>
<pad name="OUT-" x="19.812" y="-8.636" drill="1.5" diameter="2.5" shape="square"/>
<pad name="OUT+" x="19.812" y="8.636" drill="1.5" diameter="2.5" shape="square"/>
<hole x="-14.478" y="7.62" drill="3"/>
<hole x="15.24" y="-7.62" drill="3"/>
<text x="0" y="11.43" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
<text x="0" y="-11.43" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
<text x="-19.685" y="0" size="1.778" layer="21" rot="R90" align="center">IN</text>
<text x="19.685" y="0" size="1.778" layer="21" rot="R90" align="center">OUT</text>
<wire x1="19.685" y1="6.985" x2="19.685" y2="5.715" width="0.254" layer="21"/>
<wire x1="19.05" y1="6.35" x2="20.32" y2="6.35" width="0.254" layer="21"/>
<wire x1="-19.685" y1="-6.985" x2="-19.685" y2="-5.715" width="0.254" layer="21"/>
<wire x1="19.685" y1="-6.985" x2="19.685" y2="-5.715" width="0.254" layer="21"/>
<wire x1="-19.685" y1="6.985" x2="-19.685" y2="5.715" width="0.254" layer="21"/>
<wire x1="-20.32" y1="6.35" x2="-19.05" y2="6.35" width="0.254" layer="21"/>
</package>
<package name="SHK20Q" urn="urn:adsk.eagle:footprint:14047/1" locally_modified="yes">
<description>&lt;b&gt;FUSE HOLDER&lt;/b&gt;&lt;p&gt; 5 x 20 mm, SH contact, E1207 Buerklin 46G6061</description>
<wire x1="-5.08" y1="2.921" x2="5.08" y2="2.921" width="0.0508" layer="21"/>
<wire x1="-9.652" y1="3.683" x2="-6.096" y2="3.683" width="0.1524" layer="51"/>
<wire x1="-10.414" y1="-3.683" x2="-10.414" y2="-3.429" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="3.683" x2="-10.414" y2="3.429" width="0.1524" layer="21"/>
<wire x1="-9.906" y1="2.54" x2="-5.842" y2="2.54" width="0.1524" layer="51"/>
<wire x1="-6.096" y1="-3.683" x2="-9.652" y2="-3.683" width="0.1524" layer="51"/>
<wire x1="-5.842" y1="-3.683" x2="-5.842" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="-3.683" x2="-11.049" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="-10.795" y1="-3.429" x2="-10.414" y2="-3.429" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="-3.429" x2="-10.414" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="-5.842" y1="2.54" x2="-5.842" y2="3.683" width="0.1524" layer="21"/>
<wire x1="-11.049" y1="-3.683" x2="-11.049" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-11.049" y1="0.889" x2="-10.795" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-10.795" y1="0.889" x2="-10.795" y2="-3.429" width="0.1524" layer="21"/>
<wire x1="5.08" y1="0" x2="-5.08" y2="0" width="0.0508" layer="21"/>
<wire x1="5.08" y1="-2.921" x2="-5.08" y2="-2.921" width="0.0508" layer="21"/>
<wire x1="9.652" y1="-3.683" x2="6.096" y2="-3.683" width="0.1524" layer="51"/>
<wire x1="10.414" y1="3.683" x2="10.414" y2="3.429" width="0.1524" layer="21"/>
<wire x1="9.906" y1="2.54" x2="5.842" y2="2.54" width="0.1524" layer="51"/>
<wire x1="10.414" y1="-3.683" x2="10.414" y2="-3.429" width="0.1524" layer="21"/>
<wire x1="9.906" y1="-2.54" x2="5.842" y2="-2.54" width="0.1524" layer="51"/>
<wire x1="6.096" y1="3.683" x2="9.652" y2="3.683" width="0.1524" layer="51"/>
<wire x1="5.842" y1="3.683" x2="5.842" y2="2.54" width="0.1524" layer="21"/>
<wire x1="10.414" y1="3.683" x2="11.049" y2="3.683" width="0.1524" layer="21"/>
<wire x1="10.795" y1="3.429" x2="10.414" y2="3.429" width="0.1524" layer="21"/>
<wire x1="10.414" y1="3.429" x2="10.414" y2="2.54" width="0.1524" layer="21"/>
<wire x1="5.842" y1="-2.54" x2="5.842" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="10.414" y1="-3.683" x2="11.049" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="10.795" y1="-3.429" x2="10.414" y2="-3.429" width="0.1524" layer="21"/>
<wire x1="10.414" y1="-3.429" x2="10.414" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="10.795" y1="-3.429" x2="10.795" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="11.049" y1="3.683" x2="11.049" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="3.683" x2="-11.049" y2="3.683" width="0.1524" layer="21"/>
<wire x1="-10.795" y1="3.429" x2="-10.414" y2="3.429" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="3.429" x2="-10.414" y2="2.54" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="2.54" x2="-10.414" y2="2.032" width="0.1524" layer="21"/>
<wire x1="-10.795" y1="3.429" x2="-10.795" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-11.049" y1="0.889" x2="-11.049" y2="3.683" width="0.1524" layer="21"/>
<wire x1="10.795" y1="-0.889" x2="11.049" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="10.795" y1="-0.889" x2="10.795" y2="3.429" width="0.1524" layer="21"/>
<wire x1="11.049" y1="-0.889" x2="11.049" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="9.906" y1="2.54" x2="10.414" y2="2.54" width="0.1524" layer="21"/>
<wire x1="9.652" y1="3.683" x2="10.414" y2="3.683" width="0.1524" layer="21"/>
<wire x1="6.096" y1="3.683" x2="5.842" y2="3.683" width="0.1524" layer="21"/>
<wire x1="6.096" y1="-3.683" x2="5.842" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="9.652" y1="-3.683" x2="10.414" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="9.906" y1="-2.54" x2="10.414" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="10.414" y1="-2.54" x2="10.414" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="-6.096" y1="-3.683" x2="-5.842" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="-9.652" y1="-3.683" x2="-10.414" y2="-3.683" width="0.1524" layer="21"/>
<wire x1="-9.906" y1="-2.54" x2="-10.414" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="2.54" x2="-9.906" y2="2.54" width="0.1524" layer="21"/>
<wire x1="-10.414" y1="3.683" x2="-9.652" y2="3.683" width="0.1524" layer="21"/>
<wire x1="-6.096" y1="3.683" x2="-5.842" y2="3.683" width="0.1524" layer="21"/>
<wire x1="-9.906" y1="-2.54" x2="-5.842" y2="-2.54" width="0.1524" layer="51"/>
<pad name="1A" x="-7.874" y="2.54" drill="1.5" diameter="3.81" shape="long"/>
<pad name="2A" x="7.874" y="2.54" drill="1.5" diameter="3.81" shape="long"/>
<pad name="2B" x="7.874" y="-2.54" drill="1.5" diameter="3.81" shape="long"/>
<pad name="1B" x="-7.874" y="-2.54" drill="1.5" diameter="3.81" shape="long"/>
<text x="-3.81" y="-5.08" size="1.778" layer="27" ratio="10">&gt;VALUE</text>
<text x="-3.81" y="3.302" size="1.778" layer="25" ratio="10">&gt;NAME</text>
<rectangle x1="-5.08" y1="1.651" x2="5.08" y2="2.159" layer="21"/>
<rectangle x1="-5.08" y1="-2.159" x2="5.08" y2="-1.651" layer="21"/>
<rectangle x1="5.08" y1="-3.175" x2="5.588" y2="3.175" layer="21"/>
<rectangle x1="10.795" y1="-0.889" x2="11.049" y2="3.683" layer="21"/>
<rectangle x1="-10.795" y1="-3.683" x2="-10.414" y2="-3.429" layer="21"/>
<rectangle x1="-5.588" y1="-3.175" x2="-5.08" y2="3.175" layer="21"/>
<rectangle x1="-11.049" y1="-3.683" x2="-10.795" y2="0.889" layer="21"/>
<rectangle x1="5.588" y1="-3.175" x2="5.842" y2="-2.159" layer="21"/>
<rectangle x1="5.588" y1="2.159" x2="5.842" y2="3.175" layer="21"/>
<rectangle x1="9.906" y1="-2.54" x2="10.16" y2="2.54" layer="21"/>
<rectangle x1="5.842" y1="-2.54" x2="9.906" y2="-2.159" layer="51"/>
<rectangle x1="5.842" y1="2.159" x2="9.906" y2="2.54" layer="51"/>
<rectangle x1="-10.16" y1="-2.54" x2="-9.906" y2="2.54" layer="21"/>
<rectangle x1="-9.906" y1="2.159" x2="-5.842" y2="2.54" layer="51"/>
<rectangle x1="-5.842" y1="2.159" x2="-5.588" y2="3.175" layer="21"/>
<rectangle x1="-9.906" y1="-2.54" x2="-5.842" y2="-2.159" layer="51"/>
<rectangle x1="-5.842" y1="-3.175" x2="-5.588" y2="-2.159" layer="21"/>
</package>
</packages>
<packages3d>
<package3d name="CPOL-RADIAL-5MM-10MM" urn="urn:adsk.eagle:package:37412/1" type="box">
<description>5 mm spaced PTHs in 10 mm diameter silk ring</description>
<packageinstances>
<packageinstance name="CPOL-RADIAL-5MM-10MM"/>
</packageinstances>
</package3d>
<package3d name="CPOL-RADIAL-5MM-10MM-KIT" urn="urn:adsk.eagle:package:37421/1" type="box">
<description>5 mm spaced PTHs, with 10 mm silk ring and no exposed copper on top</description>
<packageinstances>
<packageinstance name="CPOL-RADIAL-5MM-10MM-KIT"/>
</packageinstances>
</package3d>
<package3d name="0402" urn="urn:adsk.eagle:package:37413/1" type="box">
<description>Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="0402"/>
</packageinstances>
</package3d>
<package3d name="0603" urn="urn:adsk.eagle:package:37414/1" type="box">
<description>Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="0603"/>
</packageinstances>
</package3d>
<package3d name="CAP-PTH-SMALL-KIT" urn="urn:adsk.eagle:package:37428/1" type="box">
<description>CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).

Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
<packageinstances>
<packageinstance name="CAP-PTH-SMALL-KIT"/>
</packageinstances>
</package3d>
<package3d name="SHK20Q" urn="urn:adsk.eagle:package:14073/1" type="box">
<description>FUSE HOLDER 5 x 20 mm, SH contact, E1207 Buerklin 46G6061</description>
<packageinstances>
<packageinstance name="SHK20Q"/>
</packageinstances>
</package3d>
</packages3d>
<symbols>
<symbol name="XT60_FEMALE">
<description>2 Pin Representation : &lt;B&gt; Vertical Mount Through-Hole Female (receptacle) XT60 Connector&lt;/B&gt;</description>
<pin name="2" x="5.08" y="-2.54" length="middle" rot="R180"/>
<pin name="1" x="5.08" y="2.54" length="middle" rot="R180"/>
<wire x1="0" y1="-5.08" x2="0" y2="5.08" width="0.254" layer="94"/>
<wire x1="0" y1="5.08" x2="-7.62" y2="5.08" width="0.254" layer="94"/>
<wire x1="-7.62" y1="5.08" x2="-7.62" y2="-5.08" width="0.254" layer="94"/>
<wire x1="-7.62" y1="-5.08" x2="0" y2="-5.08" width="0.254" layer="94"/>
<text x="-7.62" y="-7.62" size="1.778" layer="95">&gt;NAME</text>
<text x="-7.62" y="7.62" size="1.778" layer="96" align="top-left">&gt;VALUE</text>
</symbol>
<symbol name="CAP_POL">
<wire x1="-2.54" y1="0" x2="2.54" y2="0" width="0.254" layer="94"/>
<wire x1="0" y1="-1.016" x2="0" y2="-2.54" width="0.1524" layer="94"/>
<wire x1="0" y1="-1" x2="2.4892" y2="-1.8542" width="0.254" layer="94" curve="-37.878202" cap="flat"/>
<wire x1="-2.4669" y1="-1.8504" x2="0" y2="-1.0161" width="0.254" layer="94" curve="-37.376341" cap="flat"/>
<text x="1.016" y="0.635" size="1.778" layer="95" font="vector">&gt;NAME</text>
<text x="1.016" y="-4.191" size="1.778" layer="96" font="vector">&gt;VALUE</text>
<rectangle x1="-2.253" y1="0.668" x2="-1.364" y2="0.795" layer="94"/>
<rectangle x1="-1.872" y1="0.287" x2="-1.745" y2="1.176" layer="94"/>
<pin name="+" x="0" y="2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
<pin name="-" x="0" y="-5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
</symbol>
<symbol name="CAP">
<wire x1="0" y1="2.54" x2="0" y2="2.032" width="0.1524" layer="94"/>
<wire x1="0" y1="0" x2="0" y2="0.508" width="0.1524" layer="94"/>
<text x="1.524" y="2.921" size="1.778" layer="95" font="vector">&gt;NAME</text>
<text x="1.524" y="-2.159" size="1.778" layer="96" font="vector">&gt;VALUE</text>
<rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
<rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
<pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
<pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
</symbol>
<symbol name="DC-DC-STEP-DOWN-LM2596">
<description>Symbol : &lt;b&gt;DC/DC Step-Down Regulator&lt;/b&gt; based on &lt;b&gt;LM2596-ADJ Chip&lt;/b&gt;</description>
<pin name="IN+" x="-17.78" y="5.08" visible="pin" length="middle"/>
<pin name="IN-" x="-17.78" y="-5.08" visible="pin" length="middle"/>
<pin name="OUT+" x="17.78" y="5.08" visible="pin" length="middle" rot="R180"/>
<pin name="OUT-" x="17.78" y="-5.08" visible="pin" length="middle" rot="R180"/>
<wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>
<wire x1="12.7" y1="10.16" x2="12.7" y2="-10.16" width="0.254" layer="94"/>
<wire x1="12.7" y1="-10.16" x2="-12.7" y2="-10.16" width="0.254" layer="94"/>
<wire x1="-12.7" y1="-10.16" x2="-12.7" y2="10.16" width="0.254" layer="94"/>
<text x="-12.7" y="15.24" size="1.778" layer="95">&gt;NAME</text>
<text x="-12.7" y="12.7" size="1.778" layer="96">&gt;VALUE</text>
</symbol>
<symbol name="SHK20Q">
<description>&lt;b&gt;FUSE HOLDER&lt;/b&gt;&lt;p&gt; 5 x 20 mm, SH contact, E1207 Buerklin 46G6061</description>
<wire x1="-3.81" y1="-0.762" x2="3.81" y2="-0.762" width="0.254" layer="94"/>
<wire x1="3.81" y1="0.762" x2="-3.81" y2="0.762" width="0.254" layer="94"/>
<wire x1="3.81" y1="-0.762" x2="3.81" y2="0.762" width="0.254" layer="94"/>
<wire x1="-3.81" y1="0.762" x2="-3.81" y2="-0.762" width="0.254" layer="94"/>
<text x="-3.81" y="1.397" size="1.778" layer="95">&gt;NAME</text>
<text x="-3.81" y="-2.921" size="1.778" layer="96">&gt;VALUE</text>
<pin name="1B" x="-2.54" y="0" visible="off" length="short" direction="pas"/>
<pin name="1A" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
<pin name="2A" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
<pin name="2B" x="2.54" y="0" visible="off" length="short" direction="pas" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="XT60_FEMALE" prefix="J" uservalue="yes">
<description>&lt;B&gt;Vertical Mount Through-Hole Female (receptacle) XT60 Connector&lt;/B&gt;</description>
<gates>
<gate name="G$1" symbol="XT60_FEMALE" x="5.08" y="0"/>
</gates>
<devices>
<device name="" package="XT60_FEMALE">
<connects>
<connect gate="G$1" pin="1" pad="+"/>
<connect gate="G$1" pin="2" pad="-"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="1000UF" prefix="C">
<description>&lt;h3&gt;1,000µF/1mF ceramic capacitors&lt;/h3&gt;
&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;
CAP-08070</description>
<gates>
<gate name="G$1" symbol="CAP_POL" x="0" y="0"/>
</gates>
<devices>
<device name="-RADIAL-5MM-25V-20%" package="CPOL-RADIAL-5MM-10MM">
<connects>
<connect gate="G$1" pin="+" pad="+"/>
<connect gate="G$1" pin="-" pad="-"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37412/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-09538"/>
<attribute name="VALUE" value="1mF"/>
</technology>
</technologies>
</device>
<device name="-RADIAL-5MM-35V-20%-KIT" package="CPOL-RADIAL-5MM-10MM-KIT">
<connects>
<connect gate="G$1" pin="+" pad="+"/>
<connect gate="G$1" pin="-" pad="-"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37421/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-09538"/>
<attribute name="VALUE" value="1mf"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="0.1UF" prefix="C">
<description>&lt;h3&gt;0.1µF ceramic capacitors&lt;/h3&gt;
&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="CAP" x="0" y="0"/>
</gates>
<devices>
<device name="-0402-16V-10%" package="0402">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37413/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-12416"/>
<attribute name="VALUE" value="0.1uF"/>
</technology>
</technologies>
</device>
<device name="-0603-25V-(+80/-20%)" package="0603">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37414/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-00810"/>
<attribute name="VALUE" value="0.1uF"/>
</technology>
</technologies>
</device>
<device name="-0603-25V-5%" package="0603">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37414/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-08604"/>
<attribute name="VALUE" value="0.1uF"/>
</technology>
</technologies>
</device>
<device name="-KIT-EZ-50V-20%" package="CAP-PTH-SMALL-KIT">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37428/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-08370"/>
<attribute name="VALUE" value="0.1uF"/>
</technology>
</technologies>
</device>
<device name="-0603-100V-10%" package="0603">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37414/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-08390"/>
<attribute name="VALUE" value="0.1uF"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="DC-DC-STEP-DOWN-LM2596">
<description>&lt;b&gt;DC/DC Step-Down Regulator&lt;/b&gt; based on &lt;b&gt;LM2596-ADJ&lt;/b&gt; chip
&lt;p&gt;&lt;b&gt;LM2596&lt;/b&gt; datasheet available here:&lt;br /&gt;&lt;a href="http://www.ti.com/lit/ds/symlink/lm2596.pdf"&gt;http://www.ti.com/lit/ds/symlink/lm2596.pdf&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;&lt;img alt="photo" src="http://www.diymodules.org/img/device-photo.php?name=DC-DC-STEP-DOWN-LM2596"&gt;&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="DC-DC-STEP-DOWN-LM2596" x="0" y="0"/>
</gates>
<devices>
<device name="" package="DC-DC-STEP-DOWN-LM2596">
<connects>
<connect gate="G$1" pin="IN+" pad="IN+"/>
<connect gate="G$1" pin="IN-" pad="IN-"/>
<connect gate="G$1" pin="OUT+" pad="OUT+"/>
<connect gate="G$1" pin="OUT-" pad="OUT-"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="SHK20Q" prefix="F" uservalue="yes">
<description>&lt;b&gt;FUSE HOLDER&lt;/b&gt;&lt;p&gt; 5 x 20 mm, SH contact, E1207 Buerklin 64G6061</description>
<gates>
<gate name="G$1" symbol="SHK20Q" x="0" y="0"/>
</gates>
<devices>
<device name="" package="SHK20Q">
<connects>
<connect gate="G$1" pin="1A" pad="1A"/>
<connect gate="G$1" pin="1B" pad="1B"/>
<connect gate="G$1" pin="2A" pad="2A"/>
<connect gate="G$1" pin="2B" pad="2B"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:14073/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="MF" value="" constant="no"/>
<attribute name="MPN" value="" constant="no"/>
<attribute name="OC_FARNELL" value="unknown" constant="no"/>
<attribute name="OC_NEWARK" value="unknown" constant="no"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<classes>
<class number="0" name="signal" width="2" drill="1">
<clearance class="0" value="1.5"/>
</class>
<class number="1" name="power" width="3" drill="2">
<clearance class="1" value="1.5"/>
</class>
</classes>
<parts>
<part name="J1" library="10-84-4060" deviceset="10-84-4060" device=""/>
<part name="J2" library="10-84-4060" deviceset="10-84-4060" device=""/>
<part name="J3" library="10-84-4060" deviceset="10-84-4060" device=""/>
<part name="J4" library="10-84-4060" deviceset="10-84-4060" device=""/>
<part name="J5" library="10-84-4060" deviceset="10-84-4060" device=""/>
<part name="J6" library="10-84-4060" deviceset="10-84-4060" device=""/>
<part name="D1" library="powerBoardReplicaRequiredComponents" deviceset="XT60_FEMALE" device=""/>
<part name="D3" library="powerBoardReplicaRequiredComponents" deviceset="XT60_FEMALE" device=""/>
<part name="D2" library="powerBoardReplicaRequiredComponents" deviceset="XT60_FEMALE" device=""/>
<part name="D4" library="powerBoardReplicaRequiredComponents" deviceset="XT60_FEMALE" device=""/>
<part name="C1" library="powerBoardReplicaRequiredComponents" deviceset="1000UF" device="-RADIAL-5MM-35V-20%-KIT" package3d_urn="urn:adsk.eagle:package:37421/1" value="1mf"/>
<part name="C2" library="powerBoardReplicaRequiredComponents" deviceset="0.1UF" device="-KIT-EZ-50V-20%" package3d_urn="urn:adsk.eagle:package:37428/1" value="0.1uF"/>
<part name="C3" library="powerBoardReplicaRequiredComponents" deviceset="0.1UF" device="-KIT-EZ-50V-20%" package3d_urn="urn:adsk.eagle:package:37428/1" value="0.1uF"/>
<part name="U$1" library="powerBoardReplicaRequiredComponents" deviceset="DC-DC-STEP-DOWN-LM2596" device=""/>
<part name="U$2" library="powerBoardReplicaRequiredComponents" deviceset="DC-DC-STEP-DOWN-LM2596" device=""/>
<part name="F1" library="powerBoardReplicaRequiredComponents" deviceset="SHK20Q" device="" package3d_urn="urn:adsk.eagle:package:14073/1"/>
</parts>
<sheets>
<sheet>
<plain>
<text x="20.32" y="104.14" size="2.54" layer="91" align="bottom-center">BATTERY INPUT</text>
<text x="58.42" y="76.2" size="2.54" layer="91" align="bottom-center">MAIN_SWITCH</text>
<text x="149.86" y="71.12" size="2.54" layer="91" align="bottom-center">EMERGENCY_PUSH_BUTTON</text>
<text x="20.32" y="129.54" size="2.54" layer="91" align="bottom-center">CHARGER INPUT</text>
<text x="287.02" y="96.52" size="2.54" layer="91" align="bottom-center">MOTOR_DRIVER</text>
<text x="55.88" y="93.98" size="2.54" layer="91" align="bottom-center">MS_ISO_NC</text>
<text x="121.92" y="93.98" size="2.54" layer="91" align="bottom-center">PWR_ISO_NO</text>
<text x="251.46" y="93.98" size="2.54" layer="91" align="bottom-center">MD_ISO_NC</text>
<text x="149.86" y="132.08" size="2.54" layer="91" align="bottom-center">MAIN_SWITCH
ISOLATION_TRIGGER</text>
<text x="109.22" y="45.72" size="2.54" layer="91" align="bottom-center">PWR_ISO_TRIG</text>
<text x="170.18" y="45.72" size="2.54" layer="91" align="bottom-center">MD_ISO_TRIG</text>
<text x="170.18" y="93.98" size="1.778" layer="91">DC-DC_NUC</text>
<text x="187.96" y="93.98" size="1.778" layer="91">EXTRA_1</text>
<text x="177.8" y="88.9" size="1.778" layer="91">EXTRA_2</text>
<text x="182.88" y="99.06" size="2.54" layer="91" align="bottom-center">POWER_PORTS</text>
<text x="142.24" y="154.94" size="2.54" layer="91" align="bottom-center">CHARGING INDICATOR</text>
<text x="134.62" y="45.72" size="2.54" layer="91" align="bottom-center">12V_PORT</text>
<text x="144.78" y="111.76" size="1.778" layer="91">FUSE
30A/40A</text>
<text x="45.72" y="116.84" size="2.54" layer="91" align="bottom-center">D1</text>
<text x="121.92" y="111.76" size="2.54" layer="91" align="bottom-center">D2</text>
<text x="208.28" y="99.06" size="2.54" layer="91" align="bottom-center">C1</text>
<text x="198.12" y="30.48" size="2.54" layer="91" align="bottom-center">D4</text>
<text x="218.44" y="99.06" size="2.54" layer="91" align="bottom-center">C2</text>
<text x="228.6" y="99.06" size="2.54" layer="91" align="bottom-center">C3</text>
<text x="198.12" y="127" size="2.54" layer="91" align="bottom-center">C1</text>
<text x="218.44" y="127" size="2.54" layer="91" align="bottom-center">C2</text>
<text x="236.22" y="127" size="2.54" layer="91" align="bottom-center">C3</text>
<text x="248.92" y="109.22" size="2.54" layer="91" align="bottom-center">D3</text>
<text x="302.26" y="55.88" size="2.54" layer="91" align="bottom-center">D1</text>
<text x="358.14" y="55.88" size="2.54" layer="91" align="bottom-center">D2</text>
<text x="302.26" y="33.02" size="2.54" layer="91" align="bottom-center">D3</text>
<text x="358.14" y="33.02" size="2.54" layer="91" align="bottom-center">D4</text>
</plain>
<instances>
<instance part="J1" gate="G$1" x="327.66" y="147.32" smashed="yes">
<attribute name="NAME" x="344.17" y="154.94" size="1.778" layer="95" align="center-left"/>
<attribute name="VALUE" x="344.17" y="152.4" size="1.778" layer="96" align="center-left"/>
</instance>
<instance part="J2" gate="G$1" x="327.66" y="124.46" smashed="yes">
<attribute name="NAME" x="344.17" y="132.08" size="1.778" layer="95" align="center-left"/>
<attribute name="VALUE" x="344.17" y="129.54" size="1.778" layer="96" align="center-left"/>
</instance>
<instance part="J3" gate="G$1" x="327.66" y="101.6" smashed="yes">
<attribute name="NAME" x="344.17" y="109.22" size="1.778" layer="95" align="center-left"/>
<attribute name="VALUE" x="344.17" y="106.68" size="1.778" layer="96" align="center-left"/>
</instance>
<instance part="J4" gate="G$1" x="411.48" y="147.32" smashed="yes">
<attribute name="NAME" x="427.99" y="154.94" size="1.778" layer="95" align="center-left"/>
<attribute name="VALUE" x="427.99" y="152.4" size="1.778" layer="96" align="center-left"/>
</instance>
<instance part="J5" gate="G$1" x="411.48" y="127" smashed="yes">
<attribute name="NAME" x="427.99" y="134.62" size="1.778" layer="95" align="center-left"/>
<attribute name="VALUE" x="427.99" y="132.08" size="1.778" layer="96" align="center-left"/>
</instance>
<instance part="J6" gate="G$1" x="411.48" y="101.6" smashed="yes">
<attribute name="NAME" x="427.99" y="109.22" size="1.778" layer="95" align="center-left"/>
<attribute name="VALUE" x="427.99" y="106.68" size="1.778" layer="96" align="center-left"/>
</instance>
<instance part="D1" gate="G$1" x="312.42" y="58.42" smashed="yes">
<attribute name="NAME" x="304.8" y="50.8" size="1.778" layer="95"/>
<attribute name="VALUE" x="304.8" y="66.04" size="1.778" layer="96" align="top-left"/>
</instance>
<instance part="D3" gate="G$1" x="370.84" y="58.42" smashed="yes">
<attribute name="NAME" x="363.22" y="50.8" size="1.778" layer="95"/>
<attribute name="VALUE" x="363.22" y="66.04" size="1.778" layer="96" align="top-left"/>
</instance>
<instance part="D2" gate="G$1" x="312.42" y="35.56" smashed="yes">
<attribute name="NAME" x="304.8" y="27.94" size="1.778" layer="95"/>
<attribute name="VALUE" x="304.8" y="43.18" size="1.778" layer="96" align="top-left"/>
</instance>
<instance part="D4" gate="G$1" x="370.84" y="35.56" smashed="yes">
<attribute name="NAME" x="363.22" y="27.94" size="1.778" layer="95"/>
<attribute name="VALUE" x="363.22" y="43.18" size="1.778" layer="96" align="top-left"/>
</instance>
<instance part="C1" gate="G$1" x="203.2" y="129.54" smashed="yes">
<attribute name="NAME" x="204.216" y="130.175" size="1.778" layer="95" font="vector"/>
<attribute name="VALUE" x="204.216" y="125.349" size="1.778" layer="96" font="vector"/>
</instance>
<instance part="C2" gate="G$1" x="223.52" y="127" smashed="yes">
<attribute name="NAME" x="225.044" y="129.921" size="1.778" layer="95" font="vector"/>
<attribute name="VALUE" x="225.044" y="124.841" size="1.778" layer="96" font="vector"/>
</instance>
<instance part="C3" gate="G$1" x="241.3" y="127" smashed="yes">
<attribute name="NAME" x="242.824" y="129.921" size="1.778" layer="95" font="vector"/>
<attribute name="VALUE" x="242.824" y="124.841" size="1.778" layer="96" font="vector"/>
</instance>
<instance part="U$1" gate="G$1" x="81.28" y="134.62" smashed="yes">
<attribute name="NAME" x="68.58" y="149.86" size="1.778" layer="95"/>
<attribute name="VALUE" x="68.58" y="147.32" size="1.778" layer="96"/>
</instance>
<instance part="U$2" gate="G$1" x="73.66" y="45.72" smashed="yes">
<attribute name="NAME" x="60.96" y="60.96" size="1.778" layer="95"/>
<attribute name="VALUE" x="60.96" y="58.42" size="1.778" layer="96"/>
</instance>
<instance part="F1" gate="G$1" x="226.06" y="149.86" smashed="yes">
<attribute name="NAME" x="222.25" y="151.257" size="1.778" layer="95"/>
<attribute name="VALUE" x="222.25" y="146.939" size="1.778" layer="96"/>
</instance>
</instances>
<busses>
</busses>
<nets>
<net name="CHARGER(L)" class="1">
<segment>
<wire x1="30.48" y1="134.62" x2="43.18" y2="134.62" width="0.1524" layer="91"/>
<wire x1="43.18" y1="134.62" x2="43.18" y2="139.7" width="0.1524" layer="91"/>
<wire x1="43.18" y1="139.7" x2="63.5" y2="139.7" width="0.1524" layer="91"/>
<label x="15.24" y="134.62" size="1.778" layer="95"/>
<label x="45.72" y="121.92" size="1.778" layer="95"/>
<wire x1="43.18" y1="134.62" x2="43.18" y2="121.92" width="0.1524" layer="91"/>
<junction x="43.18" y="134.62"/>
<pinref part="U$1" gate="G$1" pin="IN+"/>
</segment>
<segment>
<pinref part="D1" gate="G$1" pin="1"/>
<wire x1="317.5" y1="60.96" x2="320.04" y2="60.96" width="0.1524" layer="91"/>
<label x="320.04" y="60.96" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J1" gate="G$1" pin="3"/>
<wire x1="327.66" y1="144.78" x2="325.12" y2="144.78" width="0.1524" layer="91"/>
<label x="307.34" y="144.78" size="1.778" layer="95"/>
</segment>
</net>
<net name="BATTERY(L)" class="1">
<segment>
<wire x1="43.18" y1="114.3" x2="43.18" y2="109.22" width="0.1524" layer="91"/>
<wire x1="43.18" y1="109.22" x2="30.48" y2="109.22" width="0.1524" layer="91"/>
<wire x1="116.84" y1="101.6" x2="116.84" y2="106.68" width="0.1524" layer="91"/>
<wire x1="116.84" y1="106.68" x2="116.84" y2="109.22" width="0.1524" layer="91"/>
<wire x1="116.84" y1="109.22" x2="53.34" y2="109.22" width="0.1524" layer="91"/>
<junction x="43.18" y="109.22"/>
<wire x1="53.34" y1="109.22" x2="43.18" y2="109.22" width="0.1524" layer="91"/>
<wire x1="119.38" y1="106.68" x2="116.84" y2="106.68" width="0.1524" layer="91"/>
<junction x="116.84" y="106.68"/>
<wire x1="53.34" y1="99.06" x2="53.34" y2="109.22" width="0.1524" layer="91"/>
<junction x="53.34" y="109.22"/>
<label x="15.24" y="109.22" size="1.778" layer="95"/>
<label x="58.42" y="99.06" size="1.778" layer="95"/>
<label x="106.68" y="99.06" size="1.778" layer="95"/>
<label x="45.72" y="114.3" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="D1" gate="G$1" pin="2"/>
<wire x1="317.5" y1="55.88" x2="320.04" y2="55.88" width="0.1524" layer="91"/>
<label x="320.04" y="55.88" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="D3" gate="G$1" pin="2"/>
<wire x1="375.92" y1="55.88" x2="378.46" y2="55.88" width="0.1524" layer="91"/>
<label x="378.46" y="55.88" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J2" gate="G$1" pin="1"/>
<wire x1="327.66" y1="124.46" x2="325.12" y2="124.46" width="0.1524" layer="91"/>
<label x="309.88" y="124.46" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J4" gate="G$1" pin="1"/>
<wire x1="411.48" y1="147.32" x2="408.94" y2="147.32" width="0.1524" layer="91"/>
<label x="393.7" y="147.32" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J6" gate="G$1" pin="4"/>
<wire x1="431.8" y1="99.06" x2="434.34" y2="99.06" width="0.1524" layer="91"/>
<label x="439.42" y="99.06" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J6" gate="G$1" pin="6"/>
<wire x1="431.8" y1="96.52" x2="434.34" y2="96.52" width="0.1524" layer="91"/>
<label x="439.42" y="96.52" size="1.778" layer="95"/>
</segment>
</net>
<net name="PWR_ISO(OUT)" class="1">
<segment>
<wire x1="127" y1="101.6" x2="127" y2="106.68" width="0.1524" layer="91"/>
<wire x1="127" y1="106.68" x2="127" y2="109.22" width="0.1524" layer="91"/>
<wire x1="127" y1="109.22" x2="142.24" y2="109.22" width="0.1524" layer="91"/>
<wire x1="124.46" y1="106.68" x2="127" y2="106.68" width="0.1524" layer="91"/>
<junction x="127" y="106.68"/>
<label x="127" y="99.06" size="1.778" layer="95"/>
<label x="132.08" y="109.22" size="1.778" layer="95"/>
</segment>
<segment>
<wire x1="220.98" y1="149.86" x2="215.9" y2="149.86" width="0.1524" layer="91"/>
<label x="198.12" y="149.86" size="1.778" layer="95"/>
<pinref part="F1" gate="G$1" pin="1A"/>
</segment>
<segment>
<pinref part="D3" gate="G$1" pin="1"/>
<wire x1="375.92" y1="60.96" x2="378.46" y2="60.96" width="0.1524" layer="91"/>
<label x="378.46" y="60.96" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J6" gate="G$1" pin="2"/>
<wire x1="431.8" y1="101.6" x2="434.34" y2="101.6" width="0.1524" layer="91"/>
<label x="439.42" y="101.6" size="1.778" layer="95"/>
</segment>
</net>
<net name="PWR" class="1">
<segment>
<wire x1="243.84" y1="101.6" x2="243.84" y2="106.68" width="0.1524" layer="91"/>
<wire x1="243.84" y1="106.68" x2="243.84" y2="109.22" width="0.1524" layer="91"/>
<wire x1="243.84" y1="109.22" x2="228.6" y2="109.22" width="0.1524" layer="91"/>
<wire x1="228.6" y1="109.22" x2="218.44" y2="109.22" width="0.1524" layer="91"/>
<wire x1="218.44" y1="109.22" x2="208.28" y2="109.22" width="0.1524" layer="91"/>
<wire x1="208.28" y1="109.22" x2="182.88" y2="109.22" width="0.1524" layer="91"/>
<wire x1="182.88" y1="109.22" x2="152.4" y2="109.22" width="0.1524" layer="91"/>
<wire x1="246.38" y1="106.68" x2="243.84" y2="106.68" width="0.1524" layer="91"/>
<junction x="243.84" y="106.68"/>
<wire x1="228.6" y1="101.6" x2="228.6" y2="109.22" width="0.1524" layer="91"/>
<junction x="228.6" y="109.22"/>
<wire x1="208.28" y1="101.6" x2="208.28" y2="109.22" width="0.1524" layer="91"/>
<junction x="208.28" y="109.22"/>
<wire x1="218.44" y1="101.6" x2="218.44" y2="109.22" width="0.1524" layer="91"/>
<junction x="218.44" y="109.22"/>
<label x="241.3" y="99.06" size="1.778" layer="95"/>
<wire x1="182.88" y1="109.22" x2="182.88" y2="104.14" width="0.1524" layer="91"/>
<junction x="182.88" y="109.22"/>
<label x="185.42" y="104.14" size="1.778" layer="95"/>
<label x="152.4" y="106.68" size="1.778" layer="95"/>
<label x="210.82" y="101.6" size="1.778" layer="95"/>
<label x="220.98" y="101.6" size="1.778" layer="95"/>
<label x="231.14" y="101.6" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="C1" gate="G$1" pin="+"/>
<wire x1="203.2" y1="132.08" x2="203.2" y2="134.62" width="0.1524" layer="91"/>
<pinref part="C3" gate="G$1" pin="1"/>
<wire x1="203.2" y1="134.62" x2="223.52" y2="134.62" width="0.1524" layer="91"/>
<wire x1="223.52" y1="134.62" x2="241.3" y2="134.62" width="0.1524" layer="91"/>
<wire x1="241.3" y1="134.62" x2="241.3" y2="132.08" width="0.1524" layer="91"/>
<pinref part="C2" gate="G$1" pin="1"/>
<wire x1="223.52" y1="132.08" x2="223.52" y2="134.62" width="0.1524" layer="91"/>
<junction x="223.52" y="134.62"/>
<label x="220.98" y="137.16" size="1.778" layer="95"/>
</segment>
<segment>
<wire x1="231.14" y1="149.86" x2="236.22" y2="149.86" width="0.1524" layer="91"/>
<label x="238.76" y="149.86" size="1.778" layer="95"/>
<pinref part="F1" gate="G$1" pin="2A"/>
</segment>
<segment>
<pinref part="D2" gate="G$1" pin="2"/>
<wire x1="317.5" y1="33.02" x2="320.04" y2="33.02" width="0.1524" layer="91"/>
<label x="320.04" y="33.02" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J2" gate="G$1" pin="6"/>
<wire x1="347.98" y1="119.38" x2="350.52" y2="119.38" width="0.1524" layer="91"/>
<label x="353.06" y="119.38" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J2" gate="G$1" pin="3"/>
<wire x1="327.66" y1="121.92" x2="325.12" y2="121.92" width="0.1524" layer="91"/>
<label x="317.5" y="121.92" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J2" gate="G$1" pin="4"/>
<wire x1="347.98" y1="121.92" x2="350.52" y2="121.92" width="0.1524" layer="91"/>
<label x="353.06" y="121.92" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J5" gate="G$1" pin="6"/>
<wire x1="431.8" y1="121.92" x2="434.34" y2="121.92" width="0.1524" layer="91"/>
<label x="439.42" y="121.92" size="1.778" layer="95"/>
</segment>
</net>
<net name="MD_ISO(OUT)" class="1">
<segment>
<wire x1="254" y1="106.68" x2="254" y2="101.6" width="0.1524" layer="91"/>
<wire x1="251.46" y1="106.68" x2="254" y2="106.68" width="0.1524" layer="91"/>
<wire x1="276.86" y1="104.14" x2="269.24" y2="104.14" width="0.1524" layer="91"/>
<wire x1="269.24" y1="104.14" x2="269.24" y2="106.68" width="0.1524" layer="91"/>
<wire x1="269.24" y1="106.68" x2="254" y2="106.68" width="0.1524" layer="91"/>
<junction x="254" y="106.68"/>
<label x="251.46" y="99.06" size="1.778" layer="95"/>
<label x="276.86" y="101.6" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="D2" gate="G$1" pin="1"/>
<wire x1="317.5" y1="38.1" x2="320.04" y2="38.1" width="0.1524" layer="91"/>
<label x="320.04" y="38.1" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J5" gate="G$1" pin="2"/>
<wire x1="431.8" y1="127" x2="434.34" y2="127" width="0.1524" layer="91"/>
<label x="439.42" y="127" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J5" gate="G$1" pin="4"/>
<wire x1="431.8" y1="124.46" x2="434.34" y2="124.46" width="0.1524" layer="91"/>
<label x="439.42" y="124.46" size="1.778" layer="95"/>
</segment>
</net>
<net name="MS_ISO(OUT)" class="0">
<segment>
<wire x1="53.34" y1="88.9" x2="53.34" y2="81.28" width="0.1524" layer="91"/>
<label x="58.42" y="88.9" size="1.778" layer="95"/>
<label x="58.42" y="81.28" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J4" gate="G$1" pin="3"/>
<wire x1="411.48" y1="144.78" x2="408.94" y2="144.78" width="0.1524" layer="91"/>
<label x="388.62" y="144.78" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J4" gate="G$1" pin="2"/>
<wire x1="431.8" y1="147.32" x2="434.34" y2="147.32" width="0.1524" layer="91"/>
<label x="436.88" y="147.32" size="1.778" layer="95"/>
</segment>
</net>
<net name="12V" class="0">
<segment>
<wire x1="101.6" y1="50.8" x2="96.52" y2="50.8" width="0.1524" layer="91"/>
<wire x1="139.7" y1="63.5" x2="139.7" y2="60.96" width="0.1524" layer="91"/>
<wire x1="139.7" y1="60.96" x2="127" y2="60.96" width="0.1524" layer="91"/>
<wire x1="127" y1="60.96" x2="96.52" y2="60.96" width="0.1524" layer="91"/>
<wire x1="96.52" y1="60.96" x2="96.52" y2="50.8" width="0.1524" layer="91"/>
<wire x1="91.44" y1="50.8" x2="96.52" y2="50.8" width="0.1524" layer="91"/>
<junction x="96.52" y="50.8"/>
<wire x1="129.54" y1="50.8" x2="127" y2="50.8" width="0.1524" layer="91"/>
<wire x1="127" y1="50.8" x2="127" y2="60.96" width="0.1524" layer="91"/>
<junction x="127" y="60.96"/>
<label x="104.14" y="50.8" size="1.778" layer="95"/>
<label x="132.08" y="50.8" size="1.778" layer="95"/>
<label x="139.7" y="66.04" size="1.778" layer="95"/>
<pinref part="U$2" gate="G$1" pin="OUT+"/>
</segment>
<segment>
<pinref part="J3" gate="G$1" pin="5"/>
<wire x1="327.66" y1="96.52" x2="325.12" y2="96.52" width="0.1524" layer="91"/>
<label x="317.5" y="96.52" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J6" gate="G$1" pin="1"/>
<wire x1="411.48" y1="101.6" x2="408.94" y2="101.6" width="0.1524" layer="91"/>
<label x="403.86" y="101.6" size="1.778" layer="95"/>
</segment>
</net>
<net name="GND" class="0">
<segment>
<wire x1="101.6" y1="40.64" x2="96.52" y2="40.64" width="0.1524" layer="91"/>
<wire x1="160.02" y1="40.64" x2="160.02" y2="33.02" width="0.1524" layer="91"/>
<wire x1="160.02" y1="33.02" x2="127" y2="33.02" width="0.1524" layer="91"/>
<wire x1="127" y1="33.02" x2="96.52" y2="33.02" width="0.1524" layer="91"/>
<wire x1="96.52" y1="33.02" x2="96.52" y2="40.64" width="0.1524" layer="91"/>
<wire x1="91.44" y1="40.64" x2="96.52" y2="40.64" width="0.1524" layer="91"/>
<junction x="96.52" y="40.64"/>
<wire x1="129.54" y1="40.64" x2="127" y2="40.64" width="0.1524" layer="91"/>
<wire x1="127" y1="40.64" x2="127" y2="33.02" width="0.1524" layer="91"/>
<junction x="127" y="33.02"/>
<label x="104.14" y="40.64" size="1.778" layer="95"/>
<label x="132.08" y="40.64" size="1.778" layer="95"/>
<label x="162.56" y="40.64" size="1.778" layer="95"/>
<pinref part="U$2" gate="G$1" pin="OUT-"/>
</segment>
<segment>
<pinref part="J3" gate="G$1" pin="1"/>
<wire x1="327.66" y1="101.6" x2="325.12" y2="101.6" width="0.1524" layer="91"/>
<label x="317.5" y="101.6" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J3" gate="G$1" pin="6"/>
<wire x1="347.98" y1="96.52" x2="350.52" y2="96.52" width="0.1524" layer="91"/>
<label x="353.06" y="96.52" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J5" gate="G$1" pin="5"/>
<wire x1="411.48" y1="121.92" x2="408.94" y2="121.92" width="0.1524" layer="91"/>
<label x="398.78" y="121.92" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J6" gate="G$1" pin="3"/>
<wire x1="411.48" y1="99.06" x2="408.94" y2="99.06" width="0.1524" layer="91"/>
<label x="403.86" y="99.06" size="1.778" layer="95"/>
</segment>
</net>
<net name="EMG(OUT)" class="0">
<segment>
<wire x1="149.86" y1="63.5" x2="149.86" y2="50.8" width="0.1524" layer="91"/>
<wire x1="149.86" y1="50.8" x2="160.02" y2="50.8" width="0.1524" layer="91"/>
<label x="149.86" y="66.04" size="1.778" layer="95"/>
<label x="162.56" y="50.8" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J5" gate="G$1" pin="3"/>
<wire x1="411.48" y1="124.46" x2="408.94" y2="124.46" width="0.1524" layer="91"/>
<label x="393.7" y="124.46" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J3" gate="G$1" pin="3"/>
<wire x1="327.66" y1="99.06" x2="322.58" y2="99.06" width="0.1524" layer="91"/>
<label x="314.96" y="99.06" size="1.778" layer="95"/>
</segment>
</net>
<net name="BATTERY(N)" class="1">
<segment>
<wire x1="208.28" y1="93.98" x2="208.28" y2="76.2" width="0.1524" layer="91"/>
<junction x="208.28" y="76.2"/>
<wire x1="182.88" y1="76.2" x2="208.28" y2="76.2" width="0.1524" layer="91"/>
<wire x1="228.6" y1="76.2" x2="218.44" y2="76.2" width="0.1524" layer="91"/>
<wire x1="218.44" y1="76.2" x2="208.28" y2="76.2" width="0.1524" layer="91"/>
<wire x1="228.6" y1="93.98" x2="228.6" y2="76.2" width="0.1524" layer="91"/>
<junction x="228.6" y="76.2"/>
<wire x1="276.86" y1="93.98" x2="276.86" y2="76.2" width="0.1524" layer="91"/>
<wire x1="276.86" y1="76.2" x2="228.6" y2="76.2" width="0.1524" layer="91"/>
<wire x1="182.88" y1="76.2" x2="182.88" y2="27.94" width="0.1524" layer="91"/>
<wire x1="182.88" y1="27.94" x2="38.1" y2="27.94" width="0.1524" layer="91"/>
<wire x1="30.48" y1="124.46" x2="38.1" y2="124.46" width="0.1524" layer="91"/>
<wire x1="38.1" y1="124.46" x2="38.1" y2="99.06" width="0.1524" layer="91"/>
<wire x1="38.1" y1="99.06" x2="30.48" y2="99.06" width="0.1524" layer="91"/>
<junction x="38.1" y="99.06"/>
<wire x1="38.1" y1="27.94" x2="38.1" y2="40.64" width="0.1524" layer="91"/>
<wire x1="38.1" y1="40.64" x2="38.1" y2="99.06" width="0.1524" layer="91"/>
<wire x1="195.58" y1="27.94" x2="182.88" y2="27.94" width="0.1524" layer="91"/>
<junction x="182.88" y="27.94"/>
<wire x1="218.44" y1="93.98" x2="218.44" y2="76.2" width="0.1524" layer="91"/>
<junction x="218.44" y="76.2"/>
<wire x1="63.5" y1="129.54" x2="38.1" y2="129.54" width="0.1524" layer="91"/>
<wire x1="38.1" y1="129.54" x2="38.1" y2="124.46" width="0.1524" layer="91"/>
<junction x="38.1" y="124.46"/>
<label x="15.24" y="99.06" size="1.778" layer="95"/>
<label x="15.24" y="124.46" size="1.778" layer="95"/>
<wire x1="182.88" y1="76.2" x2="182.88" y2="83.82" width="0.1524" layer="91"/>
<junction x="182.88" y="76.2"/>
<label x="185.42" y="83.82" size="1.778" layer="95"/>
<label x="279.4" y="91.44" size="1.778" layer="95"/>
<label x="185.42" y="25.4" size="1.778" layer="95"/>
<wire x1="55.88" y1="40.64" x2="38.1" y2="40.64" width="0.1524" layer="91"/>
<junction x="38.1" y="40.64"/>
<wire x1="208.28" y1="93.98" x2="218.44" y2="93.98" width="0.1524" layer="91"/>
<wire x1="228.6" y1="93.98" x2="218.44" y2="93.98" width="0.1524" layer="91"/>
<junction x="218.44" y="93.98"/>
<label x="218.44" y="96.52" size="1.778" layer="95"/>
<pinref part="U$1" gate="G$1" pin="IN-"/>
<pinref part="U$2" gate="G$1" pin="IN-"/>
</segment>
<segment>
<pinref part="C1" gate="G$1" pin="-"/>
<wire x1="203.2" y1="124.46" x2="203.2" y2="121.92" width="0.1524" layer="91"/>
<pinref part="C3" gate="G$1" pin="2"/>
<wire x1="203.2" y1="121.92" x2="223.52" y2="121.92" width="0.1524" layer="91"/>
<wire x1="223.52" y1="121.92" x2="241.3" y2="121.92" width="0.1524" layer="91"/>
<wire x1="241.3" y1="121.92" x2="241.3" y2="124.46" width="0.1524" layer="91"/>
<pinref part="C2" gate="G$1" pin="2"/>
<wire x1="223.52" y1="124.46" x2="223.52" y2="121.92" width="0.1524" layer="91"/>
<junction x="223.52" y="121.92"/>
<label x="218.44" y="116.84" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="D4" gate="G$1" pin="2"/>
<wire x1="375.92" y1="33.02" x2="378.46" y2="33.02" width="0.1524" layer="91"/>
<label x="381" y="33.02" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J1" gate="G$1" pin="1"/>
<wire x1="327.66" y1="147.32" x2="325.12" y2="147.32" width="0.1524" layer="91"/>
<label x="307.34" y="147.32" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J1" gate="G$1" pin="5"/>
<wire x1="327.66" y1="142.24" x2="325.12" y2="142.24" width="0.1524" layer="91"/>
<label x="307.34" y="142.24" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J1" gate="G$1" pin="6"/>
<wire x1="347.98" y1="142.24" x2="350.52" y2="142.24" width="0.1524" layer="91"/>
<label x="353.06" y="142.24" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J2" gate="G$1" pin="5"/>
<wire x1="327.66" y1="119.38" x2="325.12" y2="119.38" width="0.1524" layer="91"/>
<label x="309.88" y="119.38" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J2" gate="G$1" pin="2"/>
<wire x1="347.98" y1="124.46" x2="350.52" y2="124.46" width="0.1524" layer="91"/>
<label x="353.06" y="124.46" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J4" gate="G$1" pin="6"/>
<wire x1="431.8" y1="142.24" x2="434.34" y2="142.24" width="0.1524" layer="91"/>
<label x="436.88" y="142.24" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J6" gate="G$1" pin="5"/>
<wire x1="411.48" y1="96.52" x2="408.94" y2="96.52" width="0.1524" layer="91"/>
<label x="396.24" y="93.98" size="1.778" layer="95"/>
</segment>
</net>
<net name="DIODE_GND" class="0">
<segment>
<wire x1="200.66" y1="27.94" x2="208.28" y2="27.94" width="0.1524" layer="91"/>
<label x="205.74" y="30.48" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="D4" gate="G$1" pin="1"/>
<wire x1="375.92" y1="38.1" x2="378.46" y2="38.1" width="0.1524" layer="91"/>
<label x="381" y="38.1" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J3" gate="G$1" pin="4"/>
<wire x1="347.98" y1="99.06" x2="350.52" y2="99.06" width="0.1524" layer="91"/>
<label x="353.06" y="99.06" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J3" gate="G$1" pin="2"/>
<wire x1="347.98" y1="101.6" x2="350.52" y2="101.6" width="0.1524" layer="91"/>
<label x="353.06" y="101.6" size="1.778" layer="95"/>
</segment>
</net>
<net name="MS_ISO_TRIG(N)" class="0">
<segment>
<wire x1="99.06" y1="129.54" x2="109.22" y2="129.54" width="0.1524" layer="91"/>
<wire x1="109.22" y1="129.54" x2="114.3" y2="129.54" width="0.1524" layer="91"/>
<wire x1="132.08" y1="149.86" x2="109.22" y2="149.86" width="0.1524" layer="91"/>
<wire x1="109.22" y1="149.86" x2="109.22" y2="129.54" width="0.1524" layer="91"/>
<junction x="109.22" y="129.54"/>
<label x="134.62" y="149.86" size="1.778" layer="95"/>
<label x="116.84" y="129.54" size="1.778" layer="95"/>
<pinref part="U$1" gate="G$1" pin="OUT-"/>
</segment>
<segment>
<pinref part="J1" gate="G$1" pin="2"/>
<wire x1="347.98" y1="147.32" x2="350.52" y2="147.32" width="0.1524" layer="91"/>
<label x="353.06" y="147.32" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J5" gate="G$1" pin="1"/>
<wire x1="411.48" y1="127" x2="408.94" y2="127" width="0.1524" layer="91"/>
<label x="388.62" y="127" size="1.778" layer="95"/>
</segment>
</net>
<net name="MS_ISO_TRIG(L)" class="0">
<segment>
<wire x1="99.06" y1="139.7" x2="104.14" y2="139.7" width="0.1524" layer="91"/>
<wire x1="104.14" y1="139.7" x2="114.3" y2="139.7" width="0.1524" layer="91"/>
<wire x1="132.08" y1="160.02" x2="104.14" y2="160.02" width="0.1524" layer="91"/>
<wire x1="104.14" y1="160.02" x2="104.14" y2="139.7" width="0.1524" layer="91"/>
<junction x="104.14" y="139.7"/>
<label x="134.62" y="160.02" size="1.778" layer="95"/>
<label x="116.84" y="139.7" size="1.778" layer="95"/>
<pinref part="U$1" gate="G$1" pin="OUT+"/>
</segment>
<segment>
<pinref part="J1" gate="G$1" pin="4"/>
<wire x1="347.98" y1="144.78" x2="350.52" y2="144.78" width="0.1524" layer="91"/>
<label x="353.06" y="144.78" size="1.778" layer="95"/>
</segment>
<segment>
<pinref part="J4" gate="G$1" pin="5"/>
<wire x1="411.48" y1="142.24" x2="408.94" y2="142.24" width="0.1524" layer="91"/>
<label x="388.62" y="139.7" size="1.778" layer="95"/>
</segment>
</net>
<net name="MS(OUT)" class="0">
<segment>
<wire x1="53.34" y1="71.12" x2="53.34" y2="50.8" width="0.1524" layer="91"/>
<wire x1="53.34" y1="50.8" x2="55.88" y2="50.8" width="0.1524" layer="91"/>
<label x="58.42" y="71.12" size="1.778" layer="95"/>
<pinref part="U$2" gate="G$1" pin="IN+"/>
</segment>
<segment>
<pinref part="J4" gate="G$1" pin="4"/>
<wire x1="431.8" y1="144.78" x2="434.34" y2="144.78" width="0.1524" layer="91"/>
<label x="436.88" y="144.78" size="1.778" layer="95"/>
</segment>
</net>
</nets>
</sheet>
</sheets>
</schematic>
</drawing>
<compatibility>
<note version="6.3" minversion="6.2.2" severity="warning">
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.
</note>
<note version="8.3" severity="warning">
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
</note>
<note version="8.3" severity="warning">
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.
</note>
</compatibility>
</eagle>